Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide - Manual (Page 70)

Micro-PWC CONFIGURATION GUIDE
50 System Configuration
• choosing a pre-configured color scheme from the Color Schemes drop-down combo box
which defines all display color parameters; available color schemes include:
• Default (seashell4 background and white text for all parameters)
• Grays
• Browns
• Blues
As selections are made, the portion of the window labelled Current Color Scheme will be updated dynami-
cally to provide immediate feedback on the results of your choices.
When you are satisfied with your selections, click Apply to apply the color selections to all the console-
type nodes in the local console group. Click OK to apply the current selections and close the Display Col-
ors window.
Displays with pre-defined colors (including Graphics, Trends, Point and Group displays, and Alarm, Event,
and Printer Review displays) are not affected by the choices made in the Display Colors window.
2.10 Security
The Micro-PWC security system:
• provides accounts which are synchronized within console groups
• defines user access to:
• Micro-PWC functions
• Process Control functions
• Plant areas
• Defines each user’s filtering of alarms and messages by:
• Area
• Priority
• Message Class
• Defines each user’s set of Quick Keys
• Provides assignment of security parameters for:
• Micro-PWC default condition (no user logged in)
• Each individual user
• Permits activation or deactivation of the security checking
At the initial system startup, the Micro-PWC security system is in the deactivated state (refer to Section
2.10.1, Security Activation ), and the condition known as the Default Login (described in Section 2.10.2,
Default Login ) exists. Until otherwise reconfigured, all functions are available directly from the Micro-PWC,
✎ Note On Micro-PWC nodes, the colors configured from this window will
be used only if the Use Desktop Colors toggle button is deselected
during the installation of the PWC3200 software, or after installation
using the PWC Setup utility.
If the Use Desktop Colors option was selected, then the the PWC
will use the color settings configured via the Windows Desktop color
scheme. The Windows Desktop color scheme is configured from
the Control Panel window.