Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide - Manual (Page 281)

Micro-PWC CONFIGURATION GUIDE
System Status Display 261
• Show Available Services
8.2.2.1 Network Info
Selecting Info > Network Info will cause a Network Info window (similar to the example in Figure 8-3 ) to be
displayed.
This window contains read-only information about the node selected from the System Status Display. The
information will include the Internet (IP) address, the host name (if any), and the number of the Group to
which the node belongs.
8.2.2.2 Show Available Services
Clicking on the second item in the Info menu, Show Available Services, will cause a Services window (sim-
ilar to the example in
Figure 8-4 ) to be displayed.
This window contains a read-only list of the services available on the node selected from the System Sta-
tus Display. This information is used by Technical Support personnel during trouble-shooting. If a node
function does not work as expected, check this list to find out if the service is actually available on the
node. Note that each data transaction on the network is preceded by a code number identifying the service
TC00536A
Figure 8-3. Network Info Window Example
TC00537A
Figure 8-4. Services Window Example