ZyXEL Communications IP PBX X6004 User Manual
Page 81
Chapter 3 Tutorials
X6004 User’s Guide
81
1
In the web configurator, click Configuration > PBX > Server Configuration >
Server > PRI to open the following screen.
Specify which PRI interface card you want to configure in the Slot and Port fields.
Then configure the Switch Type, NT/TE Mode, LineBuildOut, Framing and
Coding fields according to the settings on the peer end of PRI device or on the set
up information provided by your telephone service provider. See
for more information.
Click Apply to save your changes.
2
Click Configuration > PBX > Outbound Line Management > Outbound Line
Group to open the following screen.