ZyXEL Communications IP PBX X6004 - Manual (Page 178)

Chapter 7 Auto Provision
X6004 User’s Guide
178
7.3.2 snom Profile Setup: Edit
Use this screen to set up the auto provisioning settings for a snom extension on
the X6004. To access this screen, click Configuration > PBX > Server
Configuration > Auto Provision> snom Profile Setup and then click the Edit
button for a specific extension.
Figure 71 snom Profile Setup > Edit
Each field is described in the following table.
7.3.3 snom Profile Setup: View SPTGEN
Use this screen to view the configuration file (SPTGEN) file for a specific extension.
To access this screen, click Configuration > PBX > Server Configuration >
Auto Provision > snom Profile Setup and click the Advanced icon next to the
extension for which you want to view the SPTGEN file.
The SPTGEN file displays the configuration settings sent from the X6004 to a snom
device configured for auto provisioning. Click Cancel to go back to the snom
Profile Setup screen.
Table 37 snom Profile Setup > Edit
LABEL DESCRIPTION
Auto Provision
Profile Setting
MAC Address
Specify the MAC address of the ZyXEL device that receives
configuration settings from the X6004 for this extension.
This field is left blank for extensions assigned to software based IP
phones.
Auto Provision
Active Choose On, if you want to activate auto provisioning for this extension
or choose Off if you want to deactivate auto provisioning for this
extension.
Product Select the snom VOIP product to be targeted by this auto provision
profile. This ensures greater compatibilty between it and the X6004.
Set Profile Click Set Profile to create the configuration file and return to the snom
Profile Setup screen.
Cancel Click Cancel to go back to the snom Profile Setup screen without
saving any changes.