ZyXEL Communications IP PBX X6004 - Manual (Page 101)

Chapter 3 Tutorials
X6004 User’s Guide
101
• Rank Level: Select Debug admin
Then click Apply.
2
Open another browser and log into the X6004 using the newly created debug
admin account.
3
Go to Maintenance > Administration > Diagnostics > Packet Capture and
fill in the following information.
• Interface: LAN
• Host: 192.168.1.150
• Protocol: All
• Stop capture after: 3000 packets
• Stop capture after: 600 seconds
Then click Capture Now.
4
Re-initialize the SIP phone. This helps to get a complete packet capturing.