ZyXEL Communications IP PBX X6004 - Manual (Page 250)

Chapter 14 Ring Group
X6004 User’s Guide
250
Each field is described in the following table.
14.2.2 The Edit Ring Group Screen
Use this screen to change the description for a ring group. To access this screen,
click Configuration > PBX > Extension Management > Ring Group > Edit.
Figure 118 Ring Group > Edit
Each field is described in the following table.
Table 72 Ring Group > Add
LABEL DESCRIPTION
Add Ring Group
Machine ID
Select the ID of the X6004 on which you want to configure the ring
group. This is an internal name (not configurable) of the X6004. Only
one choice is shown if you have not configured ZyStack.
Group Name Type the name of this ring group. You can use alpha-numeric
characters and spaces are not allowed.
Description Type the description for this ring group. You can use alpha-numeric
characters and spaces are allowed.
Add Click this to save your changes.
Cancel Click this to go back to the previous screen without saving your
changes.
Table 73 Ring Group > Edit
LABEL DESCRIPTION
Ring Group Edit
Group Name
This field displays the name of this ring group.
Description Type the description for this ring group. You can use alpha-numeric
characters and spaces are allowed.
Apply Click this to save your changes.
Cancel Click this to go back to the previous screen without saving your
changes.