ZyXEL Communications IP PBX X6004 - Manual (Page 414)

Chapter 27 System Log
X6004 User’s Guide
414
Log Schedule This drop-down menu is used to configure the frequency of log
messages being sent as E-mail:
• Daily
• Weekly
• Hourly
• When Log is Full
• None.
If you select Weekly or Daily, specify a time of day when the E-mail
should be sent. If you select Weekly, then also specify which day of the
week the E-mail should be sent. If you select When Log is Full, an
alert is sent when the log fills up. If you select None, no log messages
are sent.
Day for Sending
Log Use the drop down list box to select which day of the week to send the
logs.
Time for
Sending Log Enter the time of the day in 24-hour format (for example 23:00 equals
11:00 pm) to send the logs.
SMTP
Authentication SMTP (Simple Mail Transfer Protocol) is the message-exchange
standard for the Internet. SMTP enables you to move messages from
one e-mail server to another.
Select the check box to activate SMTP authentication. If mail server
authentication is needed but this feature is disabled, you will not
receive the e-mail logs.
User Name Enter the user name (up to 31 characters) (usually the user name of a
mail account).
Password Enter the password associated with the user name above.
Log
Consolidation
Active
Some logs may be so numerous that it becomes easy to ignore other
important log messages. Select this check box to merge logs with
identical messages into one log.
Log
Consolidation
Period Specify the time interval during which the X6004 merges logs with
identical messages into one log.
Apply Click this to save your changes and to apply them to the X6004.
Cancel Click Cancel to go back to the Log Setting screen without saving your
changes.
Table 158 Log Setting > Internal Log (continued)
LABEL DESCRIPTION