ZyXEL Communications IP PBX X6004 - Manual (Page 460)

Chapter 33 Remote Management
X6004 User’s Guide
460
The following table describes the labels in this screen.
33.9 The ICMP > Add/Edit Screen
Use this screen to add trusted computer(s) from which your X6004 will respond
ping packets using ICMP. To open this screen, click the add or edit icon in the
Maintenance > Administration > Remote Management > ICMP screen.
Figure 266 ICMP > Add/Edit
Table 182 Remote Management > ICMP
LABEL DESCRIPTION
Activate ICMP
Remote
Management
White List The X6004 will not respond to any incoming Ping requests when this is
selected.
# This field displays the index number of records in this table.
Access
Interface This field displays the interface(s) through which a computer may
access the X6004 using this service.
Address This field displays trusted computers’ IP addresses that is allowed to
communicate with the X6004 using this service.
0.0.0.0 displayed means all computers are allowed to access the X6004
using this service.
An IP address displayed (for example, a.b.c.d) means only the computer
is allowed to access the X6004 using this service.
An IP address with a subnet mask displayed (for example, a.b.c.d/
255.255.255.0) means only the computers in the subnet network are
allowed to access the X6004 using this service.
Add Click Add to add a new trusted computer record.
Edit Click Edit to modify a trusted computer record.
Delete Click the Delete icon to delete a single record in this table.
Alternatively, select one or multiple records and click the Delete button
to delete record(s) at one time.