ZyXEL Communications IP PBX X6004 - Manual (Page 451)

X6004 User’s Guide
451
C
H A P T E R
3 3
Remote Management
33.1 Overview
This chapter provides information on configuring remote management.
Remote management allows you to determine which computer(s) can access
which X6004 interface. The following figure shows remote management of the
X6004 coming in from the WAN. Use HTTPS or SSH to access the X6004 more
securely than FTP and a ZyXEL V200 SIP phone.
Figure 258 Secure and Insecure Remote Management From the WAN
33.1.1 What You Can Do in this Chapter
• Use the WWW screen to configure which computers can access the X6004’s
web configurator. See Section 33.2 on page 453 .
• Use the SSH screen to configure which computers can access the X6004 via
SSH protocol. See Section 33.4 on page 455 .
• Use the FTP screen to configure which computers can access the X6004 via FTP
protocol. See Section 33.6 on page 457 .
• Use the ICMP screen to configure to which computers’ ping test the X6004
responses. See Section 33.8 on page 459 .
• Use the CTI screen to configure which ZyXEL V200 SIP phones can access the
X6004. See Section 33.10 on page 461 .
LAN WAN
HTTPS
FTP
SSH
V200
ICMP Ping