ZyXEL Communications IP PBX X6004 User Manual
Page 228
Chapter 13 Authority Group
X6004 User’s Guide
228
Call Blocking
Setting
Use this section to configure call blocking settings for your extension.
Black List
Select Disable to turn this feature off for this extension.
Select Enable and the X6004 will block all incoming calls from
extensions that you specify as blacklisted. Click the Black List (see
) button to configure phone numbers that
you want to block from calling you.
Block the calls
without Caller
ID
Select Enable and the X6004 will block all incoming calls from phone
that do not send caller ID.
Mobile
Extension
Use this section to configure your mobile extension settings.
Mobile
Extension
Select Disable to allow authority group members to turn this feature
on and off using feature codes.
Select Force Enable to override the authority group member settings
and require that all calls to use this feature.
For more information on feature codes, see
Number
Enter the number to which you want the X6004 to forward any
incoming calls to your extension.
Dial Rule
Select a dial rule to be applied to the mobile extenion. Dial rules
correspond to the Least Cost Routing rules used in Configuration >
PBX > Outbound Line Management > LCR. For more information,
see
Note: This option only works with digital outbound connections
such as BRI. Analog outbound connections such as FXO
cannot use this option.
Apply
Click this to save your changes.
Back to Peer
List
Click this to go back to the Authority Group configuration screen
without saving your changes.
Table 57 SIP Extension: Call Forward (continued)
LABEL
DESCRIPTION