ZyXEL Communications IP PBX X6004 - Manual (Page 476)

Chapter 34 System File Maintenance
X6004 User’s Guide
476
1
Rename the file you want to upload to ZLD-current and place it in the directory
from which you launch your FTP session. In our example this is the root directory
“C:\”.
2
Launch the FTP client on your computer. For example, from the command prompt
type ftp, followed by a space and the IP address of your X6004.
3
Type your username and press [ENTER] when prompted (the default is “admin”.
4
Enter your password as requested (the default is “1234”).
5
Enter bin to set transfer mode to binary.
6
Use put to transfer files from the computer to the X6004, for example, put ZLD-
current
transfers the firmware and configuration that your renamed to ZLD-
current to the X6004.
7
The X6004 uploads the file and automatically reboots. The FTP session with the
X6004 is automatically terminated.
This is a sample FTP session showing the transfer of the ZLD-current file to the
X6004:
Be sure to upload the correct model firmware as uploading the
wrong model firmware may damage your device.
C:\>ftp 172.23.37.201
Connected to 172.23.37.201.
220 ProFTPD 1.2.10 Server (ProFTPD Default Installation)
[172.23.37.201]
User (172.23.37.201:(none)): admin
331 Password required for admin.
Password: ****
230 User admin logged in.
ftp> bin
200 Type set to I
ftp> put ZLD-current
200 PORT command successful
150 Opening BINARY mode data connection for ZLD-current
226-path /etc/zyxel/ftp/.tmp/ZLD-current
226-firmware verifying...
226-firmware updating...
226-Please Wait about 5 minutes!!
226-Do not poweroff or reset,
226-system will reboot automatically after finished updating.
226 Transfer complete.
226-copy_firmware:file /etc/zyxel/ftp/.tmp/ZLD-current
226-done
226-Receive firmware success!
226-System reboot automatically!