ZyXEL Communications IP PBX X6004 User Manual
Page 77
Chapter 3 Tutorials
X6004 User’s Guide
77
• Specify an offset value. In our example, we configure an offset value of 1. The
offset value tells the X6004 how many initial digits (if any) it should strip off
of the dialed number before routing the call to the external line.
• Specify a prefix number. In this example, our ITSP has a special dial plan for
long distance calls. A caller must dial 016 in order to take advantage of the
dial plan. By adding 016 in the Prefix field, the X6004 automatically adds
016 to calls that match this dial condition. See
for an
example.
• Click Apply to save your settings.
4
You are done configuring the LCR. However, before it can be used by any of the
phones connected to the X6004, the LCR needs to be assigned to an appropriate
authority group.