Auto provision, 1 overview, 1 what you can do in this chapter – ZyXEL Communications IP PBX X6004 User Manual
Page 171: Chapter 7 auto provision, Auto provision (171)
X6004 User’s Guide
171
C
H A P T E R
7
Auto Provision
7.1 Overview
This chapter shows you how to set up auto provisioning for the SIP clients of the
X6004.
Auto provisioning allows administrators to configure VoIP related settings on
ZyXEL’s SIP clients from a central location. You can set up and maintain a
configuration file associated with a SIP extension on the X6004. Auto provisioning
has the VoIP devices periodically download the configuration file from the X6004.
Note: Check the documentation that came with your ZyXEL softphone, IP phone, ATA
or other device to see if it supports auto provisioning.
The configuration file contains the settings you configure for a specific telephone
extension in your organization. It also contains SIP settings necessary for the
device to register with the X6004. The configuration file is encrypted using 3DES
(Triple Data Encryption Standard). See
for more
information on extensions and
for more information on SIP
settings.
7.1.1 What You Can Do in this Chapter
• Use the Auto Provision screen to configure auto provisioning files for your
ZyXEL VoIP devices connected to this Device. See
• Use the snom Profile Setup screen to configure auto provisioning for the snom
VoIP devices connected to this Device. See
.
• Use the Auto Firmware Upgrade screen to configure the information that IP
phones connected to the X6004 will use to upgrade their own firmware from an
FTP server. See
• Use the EZ Provision screen to set the administrator PIN code required for
initiating EZ provisioning between the X6004 and an unconfigured IP phone.
See
.