ZyXEL Communications IP PBX X6004 - Manual (Page 223)

Chapter 13 Authority Group
X6004 User’s Guide
223
13.3.2 Add a SIP Extension: The Basic Screen
Use this screen to add a SIP extension to an authority group on the X6004. To
access this screen, click the Add icon in the Authority Group configuration
screen.
Figure 99 Add a SIP Extension: Basic
Each field is described in the following table.
Table 55 Add a SIP Extension: Basic
LABEL DESCRIPTION
Group Select the authority group you want this extension to belong to.
Extension
Number Type the extension number for this IP phone extension. The extension
number can be 3-10 digits.
Web/IVR/VM
PIN Code Type the PIN code that allows the person with this extension to access
the web portal, Interactive Voice Response system or Voice Mail.
This value can be 4-8 digits.
SIP Auth. User
Name Type the SIP user name associated with this extension. The IP phone
registering with the X6004 must provide this for authentication. The
user name can be 1-20 alphanumeric characters (A-Z, a-z, 0-9) and
underscores (_).
SIP Auth.
Password Select Customization and type the SIP password associated with this
extension. The IP phone registering with the X6004 must provide this
for authentication. The password can be 4-32 alphanumeric characters
(A-Z, a-z, 0-9). Spaces are not allowed.
If you are using auto provisioning (see Chapter 7 on page 171 ), you can
select Random and type the length of the password (4 - 32). The
X6004 will assign a random SIP password to this extension. The
password will be automatically sent to the IP phone client.