ZyXEL Communications IP PBX X6004 - Manual (Page 520)

Chapter 38 Troubleshooting
X6004 User’s Guide
520
38.6.3.1 The Initrd Menus
The initrd menus emulate a simple text-based user interface.
Figure 299 The Main Menu
You should be familiar with the following operations before you try to use the
initrd
menus to modify the X6004’s configuration.
The following table describes the labels in the initrd main menu screen.
+--------Main Menu---------+
| IP Address |
| Check File System |
| Admin Default |
| Command Mode |
| |
| Reboot |
+--------------------------+
Table 202 Navigation
OPERATION KEYSTROKE DESCRIPTION
Select a menu
item [UP/DOWN] To select a menu item, use either the UP or DOWN
arrow keys on your keyboard. To enter the selected
menu item’s corresponding submenu, press
[ENTER].
Move up to a
previous menu [ESC] Press [ESC] to move back to the previous menu.
Enter information [ENTER] After selecting a menu item that requires
information input, press [Enter]. A dialogue line
appears, allowing you to type the information into
it. Press [ENTER] again to save your changes or
press [ESC] to return to the menu.
Table 203 Initrd
LABEL DESCRIPTION
IP Address Select this to open the IP Address sub-menu. See Section
38.6.3.2 on page 522 for details.
Check File System Select this to run the check file system command. This ensures
the integrity of the data blocks stored in the X6004’s internal
memory. If a problem is discovered, it automatically attempts to
correct it.
Admin Default Select this to restore the admin to password to its default,
“1234”.