ZyXEL Communications IP PBX X6004 - Manual (Page 457)

Chapter 33 Remote Management
X6004 User’s Guide
457
33.6 The FTP Screen
You can use FTP (File Transfer Protocol) to upload and download the X6004’s
firmware and configuration files, please see the
Chapter 34 on page 471 for
firmware and configuration file maintenance details. To use this feature, your
computer must have an FTP client.
To change your X6004’s FTP settings, click Maintenance > Administration >
Remote Management > FTP. The screen appears as shown. Use this screen to
specify which interfaces allow FTP access and from which IP address the access
can come.
Figure 263 Remote Management > FTP
The following table describes the labels in this screen.
Apply Click this to save your changes and to apply them to the X6004.
Cancel Click this to begin configuring the fields again.
Table 179 SSH > Add/Edit (continued)
LABEL DESCRIPTION
Table 180 Remote Management > FTP
LABEL DESCRIPTION
Activate FTP
Remote
Management
White List Select this to allow only computers which use any IP addresses listed in
this screen to access your X6004 via an FTP connection.
# This field displays the index number of records in this table.
Access
Interface This field displays the interface(s) through which a computer may
access the X6004 using this service.