ZyXEL Communications IP PBX X6004 - Manual (Page 134)

Chapter 5 Network Deployment
X6004 User’s Guide
134
5.4.2 Configuring the DDNS Screen
Use this screen to configure your Dynamic DNS settings. To access this screen,
click Configuration > Network > DDNS.
Figure 45 Network > DDNS
Each field is described in the following table.
Table 16 Network > DDNS
LABEL DESCRIPTION
Enable DDNS Select this to enable the DDNS feature on your X6004.
DDNS Type Select the type of service that you are registered for with your Dynamic
DNS service provider.
Username Type your user name.
Password Type the password assigned to you.
Domain name Type the domain name assigned to your X6004 by your Dynamic DNS
provider.
You can specify up to two host names in the field separated by a
comma (",").
Wildcard Select the check box to enable DynDNS Wildcard.
Interface This field displays the interface registered to use DDNS services. On the
X6004 it always displays “WAN”.
Mail Exchanger Use this field if the mail exchange server in your organization has a
dynamically assigned IP address and you have not already registered it
with a Dynamic DNS provider. Enter the domain name of your mail
exchange server.
Apply Click this to save your changes.
Reset Click this to set every field in this screen to its last-saved value.