ZyXEL Communications IP PBX X6004 - Manual (Page 135)

Chapter 5 Network Deployment
X6004 User’s Guide
135
5.5 The NTP (Network Time Protocol) Screen
Use this screen to configure time settings on the X6004. To access this screen,
click Configuration > Network > NTP.
Figure 46 Network > NTP
Each field is described in the following table.
Table 17 Network > NTP
LABEL DESCRIPTION
Current Time
and Date This section displays the current date and time.
Time and Date
Setup
Manual
Select this if you want to specify the current date and time in the fields
below.
New Time Enter the new time in this field, and click Apply.
New Date Enter the new date in this field, and click Apply.
Get from Time
Server Select this if you want to use a time server to update the current date
and time in the X6004.
Time Server
Address 1/2 Enter the IP address or URL of your time server. Check with your ISP or
network administrator if you are unsure of this information.