ZyXEL Communications IP PBX X6004 - Manual (Page 177)

Chapter 7 Auto Provision
X6004 User’s Guide
177
Each field is described in the following table.
7.3.1 What is snom?
A pioneer in the VoIP field, snom technology AG develops IP phones for use in
corporate environments with an emphasis on quality, security and interoperabilty.
As such, the ZyXEL X6004 is designed to work as seamlessly as possible with a
variety of snom products.
For more information, visit http://www.snom.com . If you have a snom product
and are unsure how it works with autoprovisioning, feature key settings, or
firmware upgrades, consult the documentation that came with it.
Table 36 Auto Provision > snom Profile Setup
LABEL DESCRIPTION
Service Config-
uration
Machine ID
This indicates the X6004’s identification number.
Configuration Select Enable to turn on auto provisioning for this device, or Disable
to turn it off.
Current SIP
Peer List
Phone Numbers This field displays the extension number configured on the X6004.
MAC Address
This field displays the MAC address of the ZyXEL device specified to
receive configuration settings from the X6004.
This field is blank for extensions assigned to software based IP phones.
Serial No. This field displays the serial number of the software based IP phone
specified to receive configuration settings from the X6004.
This field is blank for extensions assigned to hardware based IP phones.
SPTGEN File
Exist This field displays Yes, if a configuration file (SPTGEN file) has been
created. It displays No, if an SPTGEN file has not been created.
Phone Type This field displays the type of phone connected to the X6004 using SIP.
Edit Click the Edit icon to create a configuration file and associate it with a
ZyXEL device on your network. The Auto Provision Settings screen
opens.
View SPTGEN Click the Advanced icon to view the settings in the configuration file.