ZyXEL Communications IP PBX X6004 - Manual (Page 406)

Chapter 27 System Log
X6004 User’s Guide
406
Log Severity
The X6004 can also be configured to send email alerts to an administrator based
on the severity of the event recorded. The following table outlines the severity
levels of the logs on the X6004.
27.2 The View Log Screen
The web configurator allows you to look at all of the X6004’s logs in one location.
Click Report > LOGS > System Log > View Log to open the View Log screen.
Use this screen to see the logs for the categories that you select in the Log
Setting screen (see
Section 27.3 on page 409 ). Options include logs about
system errors and administrator logins.
Table 153 Log Severity
SEVERITY
LEVEL
DESCRIPTION
ALERT
SENT?
EMERG Emergency logs are created when the X6004 is unusable,
for example a power failure. YES
ALERT Alert logs are created when administrative action must be
taken immediately, for example the backup power supply
has been activated. YES
CRIT Critical logs are created when a critical condition occurs
on the X6004, for example the system is running low on
memory. YES
ERR Error logs are created when an error occurs on the
X6004, for example a login failure by an administrator. NO
WARNING Warning logs are created when a warning condition
occurs on the X6004, for example when the X6004 fails to
register an extension. NO
NOTICE Notice logs are created when normal but significant
events occur on the X6004. For example, a new
administrator account is created on the X6004. NO
INFO Information logs are created when normal events occur.
For example, a successful creation of a SIP extension. NO
DEBUG Debugging logs are used by service and development
engineers to monitor the operations of the X6004. It is
recommended not to turn these logs on unless it is
instructed by support technicians. NO