3 before you begin, 2 lcr list, Figure 179 outbound line management > lcr – ZyXEL Communications IP PBX X6004 User Manual
Page 325: Table 108 outbound line management > lcr
Chapter 20 LCR
X6004 User’s Guide
325
Outbound Line Group
The outbound lines define a connection between the X6004 and PSTN, ISDN, ITSP
or your trusted peer. See
for more information.
20.1.3 Before You Begin
Before you start to configure an LCR, please consider the following.
• You have to define your outbound dialing plan. For example, dial a number
starting with “0” is for local calls, “200” is for international calls, “3” is a call to
branch office, etc.
• You should define at least one outbound line group. See
20.2 LCR List
Use this screen to view outbound dialing rules (LCRs) configured on the X6004. To
access this screen, click Configuration > PBX > Outbound Line Management
> LCR.
Figure 179 Outbound Line Management > LCR
Each field is described in the following table.
Table 108 Outbound Line Management > LCR
LABEL
DESCRIPTION
Delete
Select the LCRs that you want to remove in the Delete column and
then click the Delete button.
LCR Name
This is the name of the LCR.
Description
This text describes the LCR.
Move Up/Down
Use these arrows to re-arrange the LCR sequence.