ZyXEL Communications IP PBX X6004 - Manual (Page 411)

Chapter 27 System Log
X6004 User’s Guide
411
E-mail Server
1/2 Select whether you want to send logs to the e-mail address of an
administrator you specify in the Log Setting screen.
• Enable Logs - Select this to send logs to an administrator at the
time interval you specify in the Log Setting screen.
• Enable Alert Log - Select this to send e-mail alerts to an
administrator when emergency, alert or critical level logs are created
on the X6004.
Remote Server Select whether you want to send logs to the syslog servers you
configure in the Log Setting screen. For each syslog server choose one
of the following options:
• Disable All Logs - Select this if you do not log any events.
• Enable Error Logs - Select this if you want to enable error logs.
• Enable Warning Logs - Select this if you want to enable warning
and error logs.
• Enable Notice Logs - Select this if you want to enable warning,
error and notice logs.
• Enable Info Logs - Select this if you want to enable warning, error,
notice and info logs.
• Enable All Logs - Select this to log all events.
Apply Click this to save your changes and to apply them to the X6004.
Cancel Click Cancel to go back to the Log Setting screen without saving your
changes.
Table 157 Log Setting > Active Log Summary (continued)
LABEL DESCRIPTION