ZyXEL Communications IP PBX X6004 - Manual (Page 162)

Chapter 6 Server
X6004 User’s Guide
162
6.9 The E-Mail Screen
Use this screen to configure the mail server information through which the X6004
sends voice mails and CDR (Call Detail Record) files to the email addresses which
you configured in extension voice mail (see
Section 13.3.8 on page 232 ) and CDR
(see Section 28.2 on page 418 ) screens. Click Configuration > PBX > Server
Configuration > Server > E-Mail to view the screen as shown next.
Figure 63 Server > E-Mail
Each field is described in the following table.
Table 30 Server > E-Mail
LABEL DESCRIPTION
E-Mail Server Specify a mail server’s IP address.
Sender Specify the sender’s email address.
SMTP
Authentication Select this and enter your username and password if user
authentication is required in the mail server.
Apply Click this to save your changes.
Reset Click this to set every field in this screen to its last-saved value.