ZyXEL Communications IP PBX X6004 - Manual (Page 522)

Chapter 38 Troubleshooting
X6004 User’s Guide
522
38.6.3.2 The IP Address Screen
This screen allows you to configure the X6004’s WAN and LAN IP settings.
Figure 300 The IP Address Screen
The following table describes the labels in this screen.
+------------IP Address------------+
| Wan_ip_realtime Host Netmask |
| Wan_gw_realtime Host |
| Lan_ip_realtime Host Netmask |
| WAN default |
| LAN default |
| |
| Main Menu |
+----------------------------------+
Table 204 Initrd
LABEL DESCRIPTION
Wan_ip_realtime Host
Netmask Select this option and press [Enter]. When the command line
dialogue appears, type in the required information and then
press [Enter] again.
Wan_gw_realtime
Host Select this option and press [Enter]. When the command line
dialogue appears, type in the required information and then
press [Enter] again.
Lan_ip_realtime Host
Netmask Select this option and press [Enter]. When the command line
dialogue appears, type in the required information and then
press [Enter] again.
WAN default Select this to reset the X6004’s WAN IP address to its factory
default of “172.16.1.1”.
LAN default Select this to reset the X6004’s LAN IP address to its factory
default of “192.168.1.12”.
Main Menu Select this to return to the initrd main screen.