4 snom feature key setting, Table 38 snom feature key setting – ZyXEL Communications IP PBX X6004 User Manual
Page 179
Chapter 7 Auto Provision
X6004 User’s Guide
179
7.3.4 snom Feature Key Setting
Use this screen to configure the feature key settings for the snom VoIP devices
connected to the X6004. To access this screen, click Configuration > PBX >
Server Configuration > Auto Provision > snom Profile Setup then click the
snom Feature Key Setting button.
Figure 72 snom Profile Setting > snom Feature Key Setting
Each field is described in the following table.
Table 38 snom Feature Key Setting
LABEL
DESCRIPTION
snom Feature
Key Setting
Key List
This list corresponds to the special feature keys on snom VoIP phone.
Active
Select either On or Off to enable or disable a key code for the feature
key in question.
Type
Select a feature key action from this list. This only applies to the feature
key if you made it active.
For more information on feature key codes and their associated actions,
see
Set Feature Key Click Set Feature Key to create the configuration file and return to the
snom Profile Setup screen.
Cancel
Click Cancel to go back to the snom Profile Setup screen without
saving any changes.