ZyXEL Communications IP PBX X6004 - Manual (Page 166)

Chapter 6 Server
X6004 User’s Guide
166
6.11.2 Add Peer-to-Peer Local Net
Use this screen to add a subnet IP address to the localnet table for making peer-
to-peer connections. To access this screen, click Configuration > PBX > Server
Configuration > Server > Peer to Peer and click the Add icon in the
Local Net
for Peer to Peer table.
Figure 67 Peer-to-Peer > Local Net
Each field is described in the following table.
6.11.3 How Local Net and Peer-to-Peer Work Together
Peer-to-peer calls can be made through the X6004, but with certain limitations:
1
Peer-to-peer calls can be made between any devices on the LAN if they belong to
a subnet listed in the same localnet table.
Table 33 Peer to Peer > Local Net
LABEL DESCRIPTION
IPv4 subnet in
CIDR format Enter an IPv4-compatible IP address in this field then select the length
of the subnest mask from the list. This option defines a subnet for which
the X6004 can set up peer-to-peer networking.
For more information on subnetting, see
Appendix A on page 531 .
Apply Click this to save your changes.
Cancel Click this to go back to the Fake IP screen.