ZyXEL Communications IP PBX X6004 - Manual (Page 326)

Chapter 20 LCR
X6004 User’s Guide
326
20.2.1 LCR Configuration
Use this screen to choose the outbound line groups and create dialing conditions
for an LCR. To access this screen, click the Add or Edit icon in the Dial Condition
List section of the LCR screen to view the screen as shown.
Note: Only the Add LCR screen is shown. In the Edit LCR screen, some of the fields
are read-only.
Before you configure any dial conditions for an LCR, you must first configure
the LCR Setting section of this screen and click Apply.
Figure 180 LCR > ezout
Each field is described in the following table.
Apply LCR
Sequence Click this button to save your LCR sequence after re-arranging it.
Add/Edit/Delete Click Add to create a new LCR.
Click Edit to change the settings of an existing LCR.
Click Delete to remove an existing LCR.
Table 108 Outbound Line Management > LCR (continued)
LABEL DESCRIPTION
Table 109 LCR > ezout
LABEL DESCRIPTION
LCR Setting
LCR Name
Type a short name to identify this outbound dialing rule (LCR). You can
use letters “a-z”, “A-Z”, numbers “0-9” and the underscore “_”
character. Spaces are not allowed.