ZyXEL Communications IP PBX X6004 - Manual (Page 131)

Chapter 5 Network Deployment
X6004 User’s Guide
131
5.2.1 The Static LAN IP Address Screen
This screen allows you to configure a static IP address for use in conjunction with
a DHCP server run on the X6004. Click the Add button in the Network > LAN
screen to display this screen. You can also click the Edit button to display this
screen to edit an already existing item in the list.
Figure 43 Static LAN IP Address
Each field is described in the following table.
Add Click this button to add a new static IP address to the list.
Edit Click this edit an item in the list.
Apply Click this to save your changes and to apply them to the X6004.
Reset Click this to set every field in this screen to its last-saved value.
Table 13 Network > LAN (continued)
LABEL DESCRIPTION
Table 14 Network > LAN
LABEL DESCRIPTION
IP Address Enter an IP address to be used as a static IP.
MAC Address Enter the MAC address of the device to receive this IP address.
Apply Click this to save your changes and to apply them to the X6004.
Cancel Click this to return to the previous screen.