3 the customized screen, Figure 166 auto-attendant > customized, Table 101 auto-attendant > default – ZyXEL Communications IP PBX X6004 User Manual
Page 311
Chapter 19 Auto-Attendant
X6004 User’s Guide
311
Each field is described in the following table.
19.3 The Customized Screen
Use this screen to view, add, edit or delete auto-attendants from the X6004. To
access this screen, click Configuration > PBX > Outbound Line Management
> Auto-Attendant > Customized.
Figure 166 Auto-Attendant > Customized
Table 101 Auto-Attendant > Default
LABEL
DESCRIPTION
Greeting
Audio File
Upload
Click Browse to locate an audio file to be used as the auto-attendant
greeting message, and Upload to copy it to the X6004.
The audio file you upload must meet the following criteria:
• G.711 format voice file (*.wav), µ-law 8-bit mono mode.
• Size limit of a single announcement cannot exceed 1 MB.
• Size limit of all voice files is 10 Mb per X6004 (or per ZyStack).
Audio File
State
This indicates whether an audio file has been uploaded to the X6004 or
not. You can also Playback the audio file to hear how it sounds.
Operator
Key
Select either 0 or 9 to be the default operator key. When a caller
presses the operator key, his calls is routed to the associated
Extension.
Extension
Enter an extension number to associate with the operator Key. When
that key is pressed, the call is routed to this extension.
Action for Time
Out
These options indicate how the auto-attendant should proceed if no key
is pressed for 5 seconds or the caller inputs an incorrect key code three
times in a row.
Hang Up
The auto-attendant disconnects the call.
Extension
The auto-attendant routes the call to the specified extension.
ACD
The auto-attendant engages the ACD system. See
for details on this feature.
Apply
Click this to save your changes.
Reset
Click this to clear the fields on this screen and begin anew.