ZyXEL Communications IP PBX X6004 - Manual (Page 252)

Chapter 14 Ring Group
X6004 User’s Guide
252
14.2.4 The Add/Edit Page Group Screen
The screens for editing or adding page groups on the X6004 contain the same
fields. Only the screen used to add page groups is shown below. Click the Add (or
Edit) icon in the Paging section of the Ring Group configuration screen to view
the screen as shown.
Figure 120 Add/Edit Page Group
Each field is described in the following table.
Description This field displays the description for this hunt group.
Add, Edit,
Delete Click:
• Add - to create a new hunt group.
• Edit - to configure the settings of a hunt group.
• Delete - remove an existing hunt group.
Table 74 Ring Group > Advanced (continued)
LABEL DESCRIPTION
Table 75 Add/Edit Page Group
LABEL DESCRIPTION
Entry Number Type the number you have to dial to call the extensions in this page
group. This number can be from 3 to 10 digits long.
Pincode Type the password you have to dial to call the extensions in this page
group. This number can be 4-8 digits long. If you leave this field blank
then callers do not have to dial a Pincode to call the extensions in this
page group.
Max Paging
Time Type the maximum number of seconds that a person can page a group
of extensions.
Description Type a description for this page group.