RISCO Group LightSYS 2 User Manual
Page 90
Installer Programming
Page 90
Quick Keys
Parameter
Default
Range
Keyfob Instant Stay
No
Yes/No
YES: Stay arming from any 2‐way remote control will be instant.
NO: Stay arming from any 2‐way remote control will be delayed,
following exit delay 1.
Disarm using Code
No
Yes/No
Defines if a PIN code is required to perform the disarm operation while
using any of the 2‐way remote controls.
Labels
The System Labels menu enables you to modify the labels displayed by the LCD that identify
the system and partition labels. For changing labels from the keypad refer to page 62.
System: Labels
Quick Keys
Parameter
Default
Range
System
Security System
Any 16 Characters
Editʹs the global(system label)
to
Partitions 1 through 4
Partition 1 through
Partition 4
Any 16 Characters
Sounds
The Sounds menu contains parameters that enable you to set the sound(s) that will be
produced after the following system events.
Tamper Sound
Sets the sound(s) produced by a Tamper violation of a keypad and/or an
expansion module, as follows:
Silent — Produces no sound
Bell
(External Siren) Only
Buzzer
(Keypad Piezo) Only
Bell + Buzzer