RISCO Group LightSYS 2 - Manual (Page 181)

Installer Programming
Page 181
Quick Keys Parameter Default Range
3. Place the cursor on the TYPE field and use the key to
toggle between the options provided to select the keyboard
type, as follows:
 NONE
 LCD, LCDP (Model RP128KP / RP128KPP)
 LCDI , LCDPI ( Model RP432KP / RP432KP)
 WLKP (1‐Way Wireless keypad)
 STEP 2: To Assign a Partition:
1. After pressing to store your keypad choice. The following
display appears:
ASSIGN TO PAR:
KEYP=01 PAR=1
2. Assign keypad 01 to the selected partition using the [1 to 4]
keys. This partition specifies the location of the keypad and is
mainly used for quick arming. Pressing the Arm Key
automatically arms the partition
Note:
1. Non‐partitioned systems are regarded as Partition 1.
2. In partitioned systems, keypads can be selectively assigned to
specific partitions.
Press to store your choice
 STEP 3: To Assign Partition Accessibility:
Specifies the partitions that are controlled by the specified keypad.
Information about the selected partitions can also be viewed on the
specific keypad.
1. After pressing to store your partition choice. The
following display appears:
P=1234 KP=xx
YYYY MASK
2. For each partition (1 to 4), use the key to toggle between
[Y] YES and [N] NO
Note:
The xx represents the ID number of the keypad
3. Press . Define the keypad controls (Emergency keys,
multi view and Exit beep at stay. For more info see page 196).