RISCO Group LightSYS 2 User Manual
Page 187

Installer Programming
Page 187
Quick Keys
Parameter
Default
Range
Voice Module
To specify the voice module expander parameters
1. Through the menu selection, the following display appears:
VOICE MODULE
TYPE=VOICE
2. With the cursor positioned at the TYPE field, use the
key
to toggle and choose the VOICE option..
3. Press
. The following display appears.:
ENTER R. PHONE
CODE: 00
4. Enter a remote phone code and press
. The remote code is
used when calling the system from a remote phone.
Sounder
To specify and configure a sounder (siren)
1. Through the menu selection, the following display appears:
OUT DOOR SIREN:
ID=1 TYPE=NONE
2. Use the
or
keys to position the cursor over the ID
number to which you want to assign and configure the siren.
3. With the cursor positioned at the TYPE field, use the
key
to toggle and choose the siren option:
NONE
SIRN (Prosound A)
SIRN2 (ProSound B)
LUM8 (Lumin 8, See page 53)
4. Press
. The partition display appears:
P=1234 S=1
Y...
5. Use the
or
keys and the
key to assign that
partition to the siren.