RISCO Group LightSYS 2 User Manual
Page 78
Installer Programming
Page 78
System: Controls: Advanced
Quick Keys
Parameter
Default
Range
Alarm ZE Cut
No
Yes/No
YES: Produces an alarm if the communication between the main panel
and any expander is lost. A report is transmitted to the MS.
NO: No alarm occurs. The system, however, produces a local trouble
indication.
Code Grand Master
No
Yes/No
YES: Only a user with the grand master authority level can change all
user codes, along with the time and date.
NO: Users with the grand master and master authority levels can change
their own user codes, all codes with a lower authority level, and the time
and date.
Area
No
Yes/No
Changes the system operation to area instead of partition, which then
changes only the operation of a common zone.
YES: When selected, the following points are relevant:
A common zone will be armed after any partition is armed.
A common zone will be disarmed only when all partitions are
disarmed.
NO: When selected, the following points are relevant:
A common zone will be armed only when all partitions are armed.
A common zone will be disarmed when any partition is disarmed.
Global Follower
Yes
Yes/No
YES: Specifies that all zones (that are programmed to follow an
Exit/Entry delay time) will follow the Exit/Entry delay time of any armed
partition.
NO: Specifies that all zones (that are programmed to follow an entry
delay time) will follow the entry delay time of only the partitions to
which they are assigned.
Summer/Winter
No
Yes/No
YES: The LightSYS2 automatically sets its Time of Day clock one hour
ahead in the spring (on the last Sunday in March) and one hour back in
the Autumn (on the last Sunday in October).
NO: No automatic time accommodation is made.