RISCO Group LightSYS 2 - Manual (Page 70)

Installer Programming
Page 70

Timers
The Timers menu contains parameters that specify the duration of an action.
Access and configure the parameters in the System Timers menu, as follows:
System: Timers
Quick Keys Parameter Default Range

Exit/Entry Delay 1
Exit/Entry delays (Group 1).

Entry Delay 1 30 seconds 01‐255 seconds
Duration of entrance delay 1.

Exit Delay 1 45 seconds 01‐255 seconds
Duration of exit delay 1.

Exit/Entry Delay 2
Exit/Entry delays (Group 2).

Entry Delay 2 30 seconds 01‐255 seconds
Duration of entrance delay 2

Exit Delay 2 45 seconds 01‐255 seconds
Duration of exit delay 2.

Bell Timeout
04 minutes 01‐90 minutes
Duration of the external sounder(s) during alarm.

Bell Delay
00 minutes/seconds 00‐90 minutes/seconds
The time delay before the keypad sounder and the external sounder
operate after the onset of an alarm.