RISCO Group LightSYS 2 - Manual (Page 208)

Using the Installer Non‐Programming Menus
Page 208
View Menu
View
Trouble
Should be used when the system has detected a problem, which is evidenced by the rapid
flashing of the Power icon, as described in the LightSYS2 LCD Keypad Manual.
Alarm Memory
Displays the five most recent alarm conditions stored by the system
Partition Status
Allows the viewing of the partitionsʹ status and all “not ready” zones in the
system.
Note:
 Pressing on the
key from the normal operation mode displays the status
of the partition to which the keypad is assigned.
 Pressing the sequence [CODE]
from the normal operation mode will
display the status of all the partitions assigned to the user code.
Zone Status
Allows the display of all system zones and their current status.
Service Information
Allows the display of any previously entered service information and the system version.
IP Address
Use this option to view the IP address of the LightSYS2. This option is available only if IP
module is defined in the system.