RISCO Group LightSYS 2 User Manual
Page 110
Installer Programming
Page 110
Quick Keys
Parameter
Default
Range
ZZ
Green Line
Yes
A feature that follows environmental guidelines by avoiding surplus
emission This feature defines the activation of the microwave channel
while the system is disarmed.
NO ‐ Green Line feature is disabled. MW is constantly activated.
YES ‐ Green Line feature is activated.
ZZ
Self Test
Remote
Used to test the detection technologies. In the event of a failed test, a Self
Test Trouble is created.
REMOTE (Manual) ‐ The remote self test is performed by the system
when a user manually selects the Diagnostics option from the
Maintenance menu via the LightSYS2 User Functions menu
LOCAL (automatic) ‐ Once an hour, the detector automatically checks
that the detector’s channels are functioning properly.
Bus Zone: (Industrial) Lunar /BWare/iWISE DT Grade 3
Quick Keys
Parameter
Default
Range
ZZ
LEDS
On
Defines the LEDS operation mode.
OFF ‐ Disables the LEDS operation.
ON
– Enables the LEDS operation.
ZZ
MW (Microwave) Range
Trimmer
Defines the microwave channel range.
MINIMUM 25% 50% 65% 85% MAXIMUM TRIMMER
(MW is defined by the trimmer setting on the PCB)
ZZ
ACT
No
Defines the Anti‐Cloak™ Technology (ACT) operation mode..
NO – Disables the ACT mode
YES – Enables the ACT mode