RISCO Group LightSYS 2 - Manual (Page 177)

Installer Programming
Page 177
Quick Keys Parameter Default Range
Note:
The first five descriptors allow for customized words specific for the
client’s needs. The customized words are the Library message on option

After recording or assigning a message you can verify messages by
selecting [1] Play option in each category.
 
Common Message
User‐defined identification of the premises, for example, the address
and/or telephone number of the premises. This message is up to 10
seconds long. The default Common message is Hello, this is your security
system calling.
 
Zone Message
User‐defined name for the zone in which the event occurred, for example,
Kitchen. The Zone message can be up to 2 seconds long, and is only
announced when the Event announcement message concerns a zone.
 
Partition Message
User‐defined name for the partition in which the event occurred, for
example, Kitchen. The Partition message can be up to 2 seconds long.
 
Utility Output
Assigning voice messages for Utility Outputs simplifies the process of
remotely operating them by enabling the user to hear a meaningful name,
such as Heating, for each Utility Output.
 
Macro
Assigning a voice messages to a Macro simplifies the meaning of the
macro operation for the user.
 
Library Message
User defined messages for the customer needs. Each messages is self
recorded and can be up to 2 seconds long.