RISCO Group LightSYS 2 - Manual (Page 112)

Installer Programming
Page 112
Bus Zone: iWISE QUAD Grade 2
Quick Keys Parameter Default Range
ZZ
LEDS On
Defines the LEDS operation mode.
OFF ‐ Disables the LEDS operation.
ON ‐ Enables the LEDS operation
ZZ
PIR Sensitivity High
Defines the PIR sensitivity of the detector.
LOW HIGH
ZZ
Self Test Remote
Used to test the detection technologies. In the event of a failed test, a Self
Test Trouble is created
REMOTE (Manual) ‐ The remote self test is performed by the system
when a user manually selects the Diagnostics option from the
Maintenance menu via the LightSYS2 User Functions menu
LOCAL (automatic) ‐ Once an hour, the detector automatically checks
that the detector’s channels are functioning properly
Bus Zone: iWISE/BWare QUAD Grade 3
Quick Keys Parameter Default Range
ZZ
LEDS On
Defines the LEDS operation mode.
OFF ‐ Disables the LEDS operation.
ON – Enables the LEDS operation.
ZZ
PIR Sensitivity High
Defines the PIR sensitivity of the detector.
LOW HIGH
ZZ
Anti‐Mask Enable
Defines the operation of Anti Masking detection.
DISABLE ENABLE and behaves according to the settings defined in
quick keys
ZZ