RISCO Group LightSYS 2 User Manual
Page 165

Installer Programming
Page 165
Quick Keys
Parameter
Default
Range
Access Code
5678
Enables you to define an up‐to six‐alpha‐numeric‐character installation
access code.
In order to enable communication between the alarm company and the
system the same access code must subsequently be entered into the
corresponding account profile created for the installation in the
configuration software
For successful communication, the access code along with the ID code
must match between the configuration software and the system.
Remote ID
0001
Defines an ID code that serves as an extension of the access code.
In order to enable communication between the alarm company and the
installation, the same remote ID code must be entered into the account
profile in the configuration software.
For successful communication, the ID code along with the access code
must match between the Configuration Software and the main panel.
Dealers often use the customer’s monitoring station account number for
the ID code, but you can use any 4‐digit code unique to the installation.
MS Lock
000000
MS Lock is a security function used in conjunction with the configuration
software. It provides greater proprietary security when viewing
monitoring station parameters.
The same 6‐digit code, which will be stored in the panel, must be entered
into the corresponding account profile created for the installation in the
configuration software.
If there is no match between the MS Lock code defined in the main panel
and the MS Lock code defined in the configuration software, the installer
will not have permission to change the following monitoring station
parameters from the configuration software:
MS Lock, Installer Code, MS IP Port, MS IP Address, MS Phone, Default
Enable, MS Account, MS Format, MS Channel, MS Backup, MS Enable,
Remote ID, Access Code.