RISCO Group LightSYS 2 - Manual (Page 204)

Installer Programming
Page 204
 
Volume
Sets the sirenʹs internal speaker Alarm volume. The volume ranges
between 0 (silent) to 9 (Max volume). After setting/changing the volume,
sound will be emitted by the internal speaker to enable evaluation of the
selected volume level
 
Alarm 9 (1‐9)
General alarm volume
 
Squawk 9 (1‐9)
Squawk sound alarm
 
Exit Entry 9 (1‐9)
Notification of system status in exit or entry delay.
 
Serial No.
The identifying 11‐digit number of the sounder (display only)
 
Supervision
Determines if this zone will be supervised by the system expander
according to the time defined under the timer RX Supervision (see page
71)..

Lamp Times
Specify here the sounder lamp illumination duration.
 Lamp Start–Specify here the start time for the sounder lamp to be
activated.
 Lamp Stop ––Specify here the stop time for the sounder lamp to be
deactivated.