RISCO Group LightSYS 2 - Manual (Page 123)

Installer Programming
Page 123
Quick Keys Parameter Default Range

Cross Zones None
To set up a Cross Zone
1. From the Install menu, press quick keys

. The first zone link
appears:
ZONES CROSSING:
120 01 S 01
2. Press to modify the first set (01) of zone links :
CROSSING SET 01:
1
ST
= 01 2
ND
=01
3. Select the zone pairs manually, as required, by making changes to
the number of the first zone in the set, followed by the number of
the second zone. If necessary, use the or keys to position
the cursor.
Note:
Zones crossed with themselves are valid pairs. They need to
register a violation twice to trigger the alarm. This process is known
as Double Knock.
4. Press to display the correlation type screen:
PAIR: 01,02
1)NONE
Determine how the LightSYS2 will process violations of the paired
zones.
NONE– Not correlated: Temporarily disables any associated zone
pairings