RISCO Group LightSYS 2 User Manual
Page 193
Installer Programming
Page 193
Quick Keys
Parameter
Default
Range
Verify Module
The Verify Module menu provides a verification list of the modules in
accordance with the modules you defined in the
Bus Device
menu (page 179) automatically or manually.
To verify the bus’s recognition of each programmed device and
its address
1. Through the menu selection, the following display appears:
VERIFY MODULE:
VOICE:01 =VOICE
2. Use the
or
keys to scroll down the list of displayed
accessory devices (shown in the examples below) to ascertain
that all keypads and expansion modules in the installation
have been identified correctly.
VERIFY MODULE:
LCPDI:01 =LCPDI
VERIFY MODULE:
WM :01 =WM
The system displays each programmed device, its address, and whether
or not itʹs found on the bus. This helps you to identify programming
mistakes.
Wireless Devices
The Wireless Devices menu provides access to sub‐menus that are used for
allocating and deleting wireless devices in the sysytem. The Wireless Devices menu
is divided into the following sub‐menus:
RX Calibration
Allocation
Delete
Note:
Allocation wireless devices in the system can be performed only if a wires expander
module has been defined in the system.