RISCO Group LightSYS 2 User Manual
Page 76
Installer Programming
Page 76
Quick Keys
Parameter
Default
Range
Buzzer Bell
No
Yes/No
YES: If an alarm occurs when the system is armed in the stay arm mode,
a buzzer sounds for the time defined under Buzzer At Stay (see page 73)
before the external sirens operate.
NO: An alarm in the Stay Arm mode causes sirens to operate
simultaneously.
Audible Jamming
No
Yes/No
Relates to the Jamming Time parameter, described on page 71
YES: Once the specified time is reached, the Main Panel activates any
internal sounders and sends a Report Code to the MS.
NO: Same as above, except the internal sounders do not operate.
Exit Beeps at Stay
No
Yes/No
Determines whether the system will sound beeps during exit time in stay
arming.
YES: Exit beeps will sound.
NO: Exit beeps will not sound.
Forced Keyswitch
Arming
Yes
Yes/No
YES: Keyswitch or Proximity Key arming is performed on any partition.
Any violated (not READY) zone(s) in the partition will be bypassed
automatically. The partition is then ʺforce armed,ʺ and all intact zones
are capable of producing an alarm.
NO: The partition cannot be armed until all violated (not ready) zones
are secured.