RISCO Group LightSYS 2 - Manual (Page 201)

Installer Programming
Page 201
Quick Keys Parameter Default Range
 
Siren LED Follow Arm
Defines the operation mode of the Status LED2.

ALWAYS ON — The status LED2 is always on.

ALWAYS OFF — The status LED2 is deactivated.

FOLLOW ARM — The status LED2 is activated when any of the siren
selected partition is armed (Away or Stay mode).

FOLLOW ALARM ‐ The status LED 2 is activated after any alarm
condition.

ALTERNATE (Only for Lumin8) — The status LEDs will constantly
alternate
.

FLASH (Only for Lumin8) — The status LEDs will constantly flash .
 
Battery Load Test Every 24 Hours
Enables to set the time period that the LightSYS2 will automatically
generate a Load test on

NEVER: The system will not set a battery load test

EVERY 24 HOURS
 
Proximity Level
Response 3 0‐9 (seconds)
(Only for ProSound)
Defines the time (seconds) for which a proximity violation must exist
before the siren triggers an anti‐approach alarm. The option 0 indicates
that the proximity is deactivated.
 
Volume 9 0‐9 (seconds)
Sets the sirenʹs internal speaker Alarm volume. The volume ranges
between 0 (silent) to 9 (Max volume). After setting/changing the volume,
sound will be emitted by the internal speaker to enable evaluation of the
selected volume level.
 
Lamp
Use this menu to define parameters of the sounder external Lamp.