RISCO Group LightSYS 2 - Manual (Page 16)

Introduction
Page 16
Scheduling
Through the use of the systemʹs built‐in clock, it is possible to automate system operations at
the same time on selected days of the week or at a specific time within the subsequent 24‐
hour period or during vacation periods.
The system operations include:
Scheduling automatic arming and disarming (of one or more partitions).
Scheduling automatic operation of utility outputs.
Restricting users from disarming during predefined time periods
Event Logging
The LightSYS2 has the capability of storing up to 500 significant events, including arming,
disarming, bypassing, alarms, troubles, restorals, and resets. These events are logged in order
according to date and time, and when applicable, according to zone, partition, area, user
code, keypad, etc. When appropriate, such events can be displayed on an LCD keypad or
uploaded to the MS via the Configuration Software.
Advanced Installation Tools
Auto Installation: For quick and easy installation, the system performs automatic
installation of the modules connected to the bus. The system searches for the
modules by automatically verifying their connection and operation through the bus‐
scanning feature and prompts the user to approve each module connection. The auto
installation feature is performed automatically after defaulting the system or can
also be performed manually.
Self Monitoring
o
The bus test enables the system to verify the connection and the operation of the
modules connected to the bus by indicating the efficiency of each one on a 0‐
100% scale. Each result is individually displayed on the LCD keypad (or via the
Configuration Software).
o A watchdog feature, which periodically (every minute) and automatically
performs a comprehensive self‐test and reports when operating faults are
found.
o A maintenance mode which, when selected, performs an active self‐check on
many of its components.
o One‐man walk testing capabilities, enabling an installer or technician to check
the operation of each contact and detector which, when tripped, produce
audible feedback and are visibly logged at the keypad from which the test was
initiated.