RISCO Group LightSYS 2 User Manual
Page 189

Installer Programming
Page 189
Quick Keys
Parameter
Default
Range
2. Use the
or
keys to position the cursor over the ID
filed and enter the Bus Zone ID number that you are assigning
or deleting. Make sure that the detectorʹs physical ID number
is identical to the ID number you select during programming.
3. Using the arrow keys move to the Type field. Use the
key to toggle and select the detectorʹs type:
OPR12: WatchOUT PIR
ODT15: WatchOUT DT
WatIN: WatchIN
ILun3: Industrial Lunar Grade 3
iDTG3: iWISE DT Grade 3
iQUG3: iWISE QUAD Grade 3
iDTG2: iWISE DT Grade 3
iQUG2: iWISE QUAD Grade 2
BZ1: Single BUS zone expander
4. Press
to confirm. Repeat the process for the other bus
detectors
Note:
The iWISE BUS detectors have additional input on board. When
selecting iWISE Bus detector the following question will appear: ʺLink
Bus Detector to zone xx? ʺ Selecting Yes will assign the input as the
consecutive zone of the selected iWISE Bus detector.
For example: If Bus detector with ID 0:01 (Zone 1 in the system) is
defined as iQUG3 then the input of the zone
will be assigned as Zone
2.
GSM
To specify and configure an installed GSM/GPRS module
1. Through the menu selection, the following display appears:
GSM MODULE
TYPE=NONE
2. With the cursor positioned at the TYPE field, use the
key
to toggle and choose the GSM option.
3. Press
to store your choice