Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 747)

September 7, 2007 K2 Storage System Instruction Manual 747
Get controller logs
the disk or disks.
Get controller logs
1. In the Storage Utility tree view, select the controller.
2. Click Actions | Get Controller Logs .
3. A message informs you of the location of the logs.
4. Find the log files on the K2 Media Sever at C:\profile\logs.
Unbind RANK
Unbinding reverses the bind process. Unbinding might be needed when reconfiguring
a storage system.
CAUTION: Unbinding destroys all data stored on disk modules.
Refer to “About RANKs and LUNs in Storage Utility” in Chapter 15, Overview of K2
Storage Tools.
The requirements for this procedure are as follows:
• You must access Storage Utility (via the K2 System Configuration application
login) with permissions equivalent to K2 administrator or higher.
• When you access Storage Utility, the K2 Storage System must be offline.
• All iSCSI clients and K2 Media Clients in the K2 Storage System must be shut
down.
To unbind a RANK, do the following:
1. In the tree view, right-click the RANK and select Unbind .
2. When warning messages appear “…destroy all existing media…” and “Are you
sure?”, click OK to continue. The Unbind dialog box opens.
!