Setting up the l30r raid chassis, Chapter 12 installing the level 30r storage system, Primary expansion 1 expansion 2 – Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 User Manual
Page 558: Dp0 dp1
558
K2 Storage System Instruction Manual
September 7, 2007
Chapter 12 Installing the Level 30R Storage System
Setting up the L30R RAID chassis
Do the following to prepare the L30R RAID storage devices:
• Install the chassis in its permanent location. After mounting the chassis in the rack,
you must secure brackets to the front rail to support the Grass Valley bezel. Refer
to the K2 Lx0 RAID Instruction Manual for rack mount instructions.
•
“Connect the L30R RAID Primary and Expansion chassis” on page 558
•
“Power on the L30R RAID chassis” on page 559
In addition, you will configure network settings, SNMP settings, and bind RAID
disks. These tasks are part of the K2 System Configuration application and Storage
Utility procedures later in this chapter.
On the L30R RAID, you do not need to manually set a Fibre Channel address ID on
controllers or a chassis address on Expansion chassis.
“K2 RAID storage description” on page 659
Connect the L30R RAID Primary and Expansion chassis
Connect Ethernet, Fibre Channel, and SAS cabling as shown.
If you have more Expansion chassis than those illustrated, continue the indicated
cabling pattern, alternating connections for additional Expansion chassis between
DP1 and DP0. Expansion chassis 1, 3, 5, 7, and 9 connect to DP1. Expansion chassis
2, 4, 6, 8, and 10 connect to DP0.
FLT/LNK
FLT
RDY
DP-OUT
PS
FLT CLR
DP-IN
FLT/LNK
FLT
RDY
DP-OUT
PS
FLT CLR
DP-IN
FLT/LNK
FLT
RDY
DP-OUT
PS
FLT CLR
DP-IN
FLT/LNK
FLT
RDY
DP-OUT
PS
FLT CLR
DP-IN
BBU IN
MODEM
FLT/LNK
HPE
FLT
A/L
BACKUP
ACT/LNK
LNK/ACT
FLT
HP
5 4 3 2
RDY
LAN
BAT
MNT
ACS
MC
DP1
DP0
HP
1 0
BBU IN
MODEM
FLT/LNK
HPE
FLT
A/L
BACKUP
ACT/LNK
LNK/ACT
FLT
HP
5 4 3 2
RDY
LAN
BAT
MNT
ACS
MC
DP1
DP0
HP
1 0
Primary
Expansion 1
Expansion 2
DP0
DP1
To
Exp
a
n
s
ion
3
To
Exp
a
n
s
ion
4
DP0
DP1
To
Exp
a
n
s
ion
3
To
Exp
a
n
s
ion
4
To K2 Medi
a
S
erver A
To K2 Medi
a
S
erver B
To control port
on GigE
s
witch A
To control port
on GigE
s
witch B
To NH
s
erver
(option
a
l)
To NH
s
erver
(option
a
l)