Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 571)

September 7, 2007 K2 Storage System Instruction Manual 571
Configuring server A - Part 1
described in the following table:
On this page… Do this…
Define server roles
Enter the name or IP address for the K2 Media Server, as currently
configured on the machine.
Enter the name or IP address of the Ethernet switch, as currently
configured on the switch, to which the K2 Media Server is connected.
For Level 30R redundant, select all roles.
Click
Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on the
Level 30R K2 Media Server
A is as follows:
• SQL Server
• K2 Server
• File System Server
• File System Client
• SNMP Services
• QuickTime
If software with Yes in the Required column reports as Not Installed, you
must first install it on the before continuing. Refer to
Chapter 16,
Managing K2 software. After installing the software, click Check
Software . When all required software reports as Installed, click Next .